A clean mirror without streaks becomes a real challenge for many housewives.
It would seem that a simple task turns into a complex quest when, after thorough washing, unsightly marks and stains appear on the surface.
Water composition
Hard tap water contains a large amount of mineral salts. When dried, the salts form a whitish coating on the mirror surface.
Using filtered or distilled water will significantly improve cleaning results.
Inappropriate means
All-purpose cleaners often leave a thin film on glass.
Components included in household chemicals may react with the protective layer of the mirror. Specialized cleaners for glass surfaces show the best results.
Incorrect technique
Circular movements when wiping a mirror contribute to the formation of streaks. Chaotic movements with a rag distribute dirt unevenly across the surface.
The correct technique involves wiping the mirror with vertical or horizontal movements.
Quality of napkins
Fluffy rags leave small fibers on the surface. Low-quality paper towels delaminate during cleaning.
Lint-free microfiber cloths are considered the best choice for mirror care.
Temperature conditions
Hot water speeds up the evaporation process and promotes the formation of stains. Cold water slows down the dissolution of dirt.
Comfortable room water temperature ensures the best cleaning results.
Old stains
Multilayered deposits of soap splashes in the bathroom require additional treatment. Accumulated plaque from toothpaste is difficult to remove with conventional means.
Old stains require special pre-treatment.
The influence of lighting
Direct sunlight accelerates the drying of the detergent. Uneven drying of the surface leads to the formation of stains.
It is recommended to wash mirrors in cloudy weather or under artificial lighting.
Residual detergents
Insufficient rinsing leaves traces of cleaning agents. Residual soap solution crystallizes on the surface.
Thoroughly removing the detergent with a clean damp cloth prevents streaks.
Surface condition
Microcracks and damage to the amalgam make it difficult to maintain the mirror. Damage to the protective layer at the edges facilitates moisture penetration.
Old mirrors require more careful handling and special care products.