Soft bumpers intended for installation in a baby crib, like any other item that comes into contact with the baby, need to be cleaned.
This can be done in two ways: wash the sides by hand or load them into the drum of the washing machine.
Hand wash
To remove any possible dirt or foreign odor, you need to fill the bathtub with warm water and dilute a little detergent in it.
Now immerse the product in water and wait 20-30 minutes. During the washing process, do not rub the sides with your hands too much.
All that's left is to carefully squeeze out the textile and rinse thoroughly, not sparing water for this. Before sending the sides out to dry, you need to squeeze out the moisture from them again, but you shouldn't wring them out.
Machine wash
In this case, the procedure is even simpler - all you need to do is place the sides in the washing machine and set the delicate wash cycle.
The water temperature should be minimal. It wouldn't hurt to use the extra rinse function.
To dry the sides, they need to be laid out on the floor, previously covered with cotton fabric. When some of the moisture evaporates, and this takes several hours, you can hang the product to dry.
