Not all housewives have switched to gels and other alternative products that cope with their task no worse than the usual powder.
Nobody is going to write off the powder itself either. It has only one problem: sometimes, after washing, its remains are found in the tray.
Let's figure out why the product is not completely washed out of the tray and how to solve the problem.
There may be several reasons, but there are two main ones:
1) poor quality powder;
2) problems with water supply in the machine.
Of course, we must not forget about the human factor, when household chemicals are generously added to the machine in the hope that the excess will simply be washed away by water into the sewer.
In addition, if you pour powder into wet compartments, it will stick one way or another until the moment when the machine supplies water to the compartments to wash it into the drum.
Poor quality powder
But if the powder is to blame, then soon its remains will overgrow not only the tray, but also the pipes and other compartments. There is only one way out: buy quality goods from trusted sellers.
Technical malfunction
If the machine does not wash away all the powder, most likely the water pressure has weakened for some reason. The problem may be in the mesh of the inlet filter of the water supply hose. It is possible that the water supply hose has bent and does not generate sufficient pressure.
Often the problem occurs due to a very long hose. In this case, you need to read the instructions carefully.
