Is your shower head clogged? No problem!
You can easily restore the device to perfect cleanliness and make the water jet powerful again.
Just don't use aggressive cleaning agents!
It is possible that such “chemistry” will only worsen the condition of the watering can.
It is better to use a much safer and more effective remedy.
We are talking about baking soda. In addition, you will need a toothpick.
How to Clean a Shower Head with Baking Soda
If the pressure from the shower head has noticeably weakened, then the problem is most likely due to plaque that has clogged the holes.
It is very easy to remove this stain. You need to prepare a solution based on baking soda.
Take a small container, pour into it 2 tablespoons of sodium bicarbonate and a similar volume of plain water.
Mix the mixture thoroughly. The result will be a paste that should be applied to the watering can from the side of the holes.
Then you need to wait about half an hour.
Next, you need to rinse the watering can and check how powerful the water jet will be. Most likely, there will be holes that were not cleaned well. They need to be carefully pierced with a toothpick.
