How to clean a new apartment received from a developer: you can do without cleaning

03.05.2024 20:24

Before you start cleaning, it is worth determining what caused the stain and choosing the right product and its required concentration – this is the only way you can effectively deal with construction dirt.

Dirt on tiles

Stubborn stains on tiles, such as fresh primer, tile adhesive, two-component adhesive and acrylic paint, can be effectively removed with acid-alkaline products such as Alpha 19 or Alpha 20 (the difference between them is that Alpha 20 is best suited for porous tiles).

To avoid damaging the top layer of the tile, follow the instructions on the packaging and do not make the product more concentrated than required.

The sealant and greasy technical layer on the tile can be removed without leaving a trace using acetone, turpentine or paint thinner. However, to completely remove the greasy layer from the tile, you will need to go over its surface several times with the cleaning agent.

Gypsum dust, putty and grout

We have combined these three types of dirt into one group, since all of them are successfully cleaned with Probel chemicals. Pro-Brite products clean hard surfaces and create a protective layer that repels dust from walls.

Repair
Photo: © Belnovosti

Windows

Windows in an apartment from a developer can be treated with special agents that form a dust-repellent film on them, which ensures their cleanliness for a long time.
One such concentrated product is GL-Cristal Solution, which is diluted in a ratio of 1 to 50 or 1 to 40 depending on your needs.

Stretch ceilings

To remove dust from stretch ceilings, it is recommended to use "Mister Muscle" and a dry cloth. Important: wipe the coating carefully, avoiding pressure and pressure.

Previously, we talked about where bedbugs can appear in an apartment.

Elena Shimanovskaya Author: Elena Shimanovskaya Editor of Internet resources


Content
  1. Dirt on tiles
  2. Gypsum dust, putty and grout
  3. Windows
  4. Stretch ceilings