The water that flows from the tap is not always perfectly clean. Often the liquid contains impurities. And don't forget about the rust in the water supply.
As a result, plumbing fixtures that were originally snow-white may begin to turn yellow.
The use of expensive household chemicals does not guarantee the removal of this plaque.
And there is no need to use special cleaning agents. A mixture consisting of the simplest and most accessible components copes perfectly with the above-described contaminants in the bathroom.
How to prepare the remedy
Pour half a glass of baking soda into a deep container. Pour the same amount of plain water there.
The third component should be nine percent vinegar. A quarter of a glass of this product will be enough.
If you need to restore cleanliness to an acrylic bathtub, you should use lemon juice instead of vinegar.
The resulting product should be applied to the dirty plumbing. You don't need to do anything for the next five minutes.
Once the time has elapsed, the surface must be thoroughly wiped with a special brush designed for cleaning the bathtub.
After this, all that remains is to wash off the remaining product. As a result, the plumbing will become snow-white again. The entire procedure will hardly take more than ten minutes.
