There will be no trace of the problem: 4 ways to fluff up a down jacket after washing

17.03.2024 16:10

If the fluff has shrunk after washing, many people do not know what to do. It seems that such a down jacket cannot be saved and you will have to buy a new one.

However, everything is not so critical here. Therefore, it is worth remembering several methods that will help fluff up a down jacket after washing.

Tennis Ball Press

This is one of the most popular methods that is definitely worth trying.

Its essence: you need to start the spin mode, adding several tennis balls to the drum. During the spin, they will help to fluff up the fluff.

Stick or "beater"

The method may be called extravagant, but it is definitely worth trying.

Photo: © Belnovosti

The essence of the method: you need to dry the down jacket, take a stick or similar object and start to apply gentle blows to the surface.

An important condition: the stick must be smooth and physical force must be controlled, otherwise you can ruin the down jacket.

Of course, this method will not help if the fluff has sagged a lot after washing.

Air drying

After washing, hang the down jacket outdoors, preferably in a sunny place. Natural air and sunlight will help fluff up and refresh the down jacket.

This method is considered effective, but it is important to remember that the weather should be windy. It is important to create conditions so that the down jacket can dry quickly.

Creating a vacuum with a vacuum cleaner

There is also an interesting method that is based on the use of a vacuum bag and a vacuum cleaner.

You need to put the down jacket in a vacuum bag and pump all the air out of it. Then you can manually distribute the filler

It makes sense to use this method only if the fluff inside is well dried.

The effectiveness of this method depends on a number of factors, but it is definitely worth trying.

Previously, we talked about which items should not be washed with vinegar .

Author: Igor Zur Internet resource editor

Content
  1. Tennis Ball Press
  2. Stick or "beater"
  3. Air drying
  4. Creating a vacuum with a vacuum cleaner