How to soften a brush and get rid of wallpaper bubbling: these tips will come in handy if you are planning a renovation

19.01.2024 16:55

If it were necessary to describe the word “renovation” with a couple of adjectives, they would probably be epithets such as complex and difficult.

Luckily, there are a lot of tricks that can make this difficult task easier.

How to drill a hole of the right size

If you need to drill a specific hole in the wall, first measure the length of the fastener, such as a dowel. Then mark the corresponding length on the drill bit or hammer drill with bright tape or a marker.

This will help you get the hole the right size on the first try and avoid damaging the wall or disturbing your neighbors.

How to soften a brush

If your paint brushes have become stiff after not being used for a long time and have been stored in a closet, do not rush to buy new ones.

Repair
Photo: © Belnovosti

Instead, dip your brush bristles in boiling vinegar for 1-2 minutes to restore the softness your paint tool has lost.

How to get rid of wallpaper bubbling

The problem of wallpaper bubbling after pasting can be solved by eliminating excess air sources.

To do this, you should keep the door to the room where the wallpaper is being pasted closed for several days and avoid drafts by not opening windows and vents.

Earlier, the expert spoke about the depressing mistakes with tiles that many people make during bathroom renovations.

Author: Elena Shimanovskaya Editor of Internet resources

Content
  1. How to drill a hole of the right size
  2. How to soften a brush
  3. How to get rid of wallpaper bubbling