You don't have to scrub the bathtub, just apply it, rinse it off, and it's like new: this clever product will wash away any stains
A once snow-white bathtub can unpleasantly surprise you by showing traces of rust and yellow plaque.
Dirt on the surface of the bathtub significantly spoils the interior of the room. Unfortunately, this happens often and the reason for this is poor quality tap water.
Housewives have to clean the bathtub frequently to avoid new stains and streaks. But it is not always possible to get rid of unwanted dirt.
You have to buy a new expensive cleaning agent, which can be aggressive and damage the skin of your hands and ruin the coating.
A few useful tips will help you clean your bathtub from plaque and rust using simple and affordable products that can be found in every home.
To prevent scale buildup, try wiping the tub with a dry cloth or paper towel after each use. Also, keep your faucets in good condition.
However, it should be taken into account that in most cases it is not always possible to keep the bathtub in proper condition; sooner or later you will have to face such a problem as stains and streaks, and it must be solved.
Bath cleaning products
Prepare a soda mixture. Mix soda and water in a container to form a viscous paste. Apply to the surface of the bathtub and let it sit. Check the effect periodically. If the stains are not old, then after 20-30 minutes you can wash off the product with running water.
To clean the dirtiest bathtub, just take 1 tablespoon of bleach, 2 tablespoons of vinegar and mix in a container. Apply the prepared solution to the surface with a sponge, and after 2-3 minutes you can rinse it off with clean water.
